how to setup network

Set up a Wireless Network (WiFi Connection) by using these Tips

Installation of a range extender for the first time to create and build a solid home network would be annoying if you leave us at this moment. Sticking to us would be a big relief for you. Don’t worry, you have to be with us only till the process of NETGEAR Extender Setup.

Follow the below-given guidelines to get the extender configured for better internet coverage New Extender Setup

  • Unbox your range extender in the same room of router.
  • Plug them both into a power outlet. Remember, wall socket shouldn’t be damaged and electricity should be normal.
  • Take your computer closer to the router and consider connecting them both.
  • Open a web browser. The web browser should be any of your choice. But it shouldn’t be overloaded with malicious files, malware, cache, browsing history, and cookies.
  • Once opened with the web browser successfully, in the URL bar type mywifiext. If this URL doesn’t work, you can also go with
  • You will be prompt to enter username and password (default). Fill them all and proceed towards the home page of NETGEAR Genie Setup.

If your face error issues like:


  • login
  • Setup
  • WiFi Range Extender Setup


  • Or didn’t have the default login details.

Make yourself comfortable to call us any time of day or night on toll-free number 1-888-884-6940.

Now, let us make you familiar with configuration of a router for a secure wireless network

  1. Acquire a latest firmware of updated router. Ask our tech support executive to help you in selecting the best by for you.
  2. Make sure that your router and the modem are properly connected with each other. After that, consider plugging them both into an electric wall socket.
  3. Now, what you can do, take your computer and bring it closer to the router. Consider connecting them both. Avoid signal interferences.

Note: Signal interference of third-party or unauthorized WiFi devices can be a reason that causes login issues.

Configuration of a Router

  1. Install router software. Remember, not every router comes with inbuilt software. If yours isn’t one of them, then ignore this and connect your computer with the router.
  2. Choose WPA2 security (the most secure network).
  3. Open the web interface of router’s configuration.
  4. Type the default IP address of your router into field of the URL bar.
  5. You will now ask for a username and password to continue (default).
  6. Enter your internet connection information. Ask us related to the same query immediately.
  7. Set your wireless settings. Well, most routers have ‘wireless settings section’ available on the top of the device (routers) menu. From this ‘section’ you can enable or disable wireless signals, set the encryption, and can also change the name of your existing WiFi network.
  8. Once done, apply your settings. You can easily do this by clicking the ‘apply’ button.

If you have successfully done with the above-given process, consider placing your router. The place supposed to be at the center location of your house away from neighboring and public WiFi devices.

Connecting your Router


  • Connect a Device to the Network


Congratulations for your new device. It has been configured. Now, you can see that your router starts broadcasting wireless signals. Connect your computer, smartphone, or tablet with it and enjoy wireless signal connectivity all over the house.


  • Enter a Passphrase


Point to be noticed. Look, if you enabled ‘WPA2 encryption’, then you will prompt to enter a passphrase in order to get connected with your home network. Similarly, if you are using a ‘private computer’ you can disable the ‘hidden characters’ to avoid anybody seeing the encryption you are typing to connect.

Once you are connected to your ‘home network’, wait for a couple minutes as your IP address is being assigned. Once you successfully got the IP address, open a web browser and connect to a website. This process is only meant to test your network connection.

Did we help you out? Did we give an appropriate solution for mywifiext login, NETGEAR Extender Setup, and setting up a home network? Do let us know on toll-free number given above or

Unable to access IP address? Here is the solution is the default IP address for setting up extender. For logging in to NETGEAR Extender, modem, router or access point, open a web browser and access as a URL. But when users try to access this IP address, they face error messages like ‘this site can’t be reached’. If you also face this error and are looking for a solution, then you have stumbled upon the right post. In this post, we will make you aware of some useful fixes to resolve this issue. Allow us to explain you in details.

Why users face issues with

This IP address is registered as a part of private network. It is also known as host address. The IP address is being used in case when users do not get access to web address.

Accessing IP address also causes issues. This happens because it is a private IP address and can only be used within private networks. If you access this address outside the reach of private network, you will be unable to connect to it. That’s why users experience issues while opening this IP address for NETGEAR Extender Setup.

It may also happen that it is not the default IP address of your WiFi Range Extender. So, get to know your extender’s IP address carefully and then access the web user interface.

Other reasons why you come across this errors:

  • WiFi connection is disabled.
  • Extender is not turned on.
  • Router is not getting proper power supply.
  • Connectivity issues.
  • Firmware is outdated.

How to access NETGEAR Default IP address?

Mywifiext provides the simplest way to open New Extender Setup page. But users face technical issues with this web address as it is not mentioned as a regular website on internet. Therefore, users opt for NETGEAR Default IP address i.e. to open setup page for extender.

The web user interface of this IP can be accessed through http or https protocols. Follow the steps below to access it:

  1. Launch a web browser like Firefox, Chrome, Safari, Edge etc.
  2. In the address bar, type and press Enter key.
  3. Once done, the login page appears.
  4. Fill in the required details.
  5. Finally, click on log in button.

That’s how you can access this IP address and open NETGEAR Genie Setup page.

Fix issues with

Let’s have a look at the following tips which help you resolve login problems with the default IP address:

  • Connect extender and router

Ensure you have connected NETGEAR WiFi Range Extender and Router with each other either wirelessly or through an Ethernet cable.

  • Power supply

Make sure that the extender is getting a fluctuation-free power supply. If not, plug the extender into another wall plug.

  • Check internet connection

Maybe the place where you are trying to access NETGEAR Genie Setup page via is not getting strong WiFi signals. Therefore, change your location and check internet connection once.

  • Clear browser data

Delete cache, cookies and history of a web browser you are using. Exit browser window and open it again. In case the problem still troubles you, switch to another web browser and try again.

  • Check wired connections

Confirm if all wired connections are proper. If not, cross-check them carefully.

  1. Update Router Firmware

If the issue continues to appear, update the firmware to latest version. Go to webpage and check whether any new firmware version is available. If available, download that immediately. But before that, make sure to check the model number of your device as firmware versions are different for different models.

So, these were some main solutions to help you out resolve issues with IP address. If none of the aforementioned tips work for you, feel free to take help from professionals on toll-free number 1-877-425-5462.

Ways to Deal with your Slow Internet Connection

Top Five Ways to Deal with your Slow Internet Connection

A slow internet is the universe’s way of telling you to go and play outdoor games. On the other hand, it is the universe’s cruel joke to destroy your productivity and efficiency. If you are experiencing such annoying and maddening internet connectivity problems, then you will be glad to know that you have arrived at the right place. Yes, we have a definite solution to your annoying internet connectivity, and ‘Extender Linksys’ setup and login problems.

Here are 5 ways to troubleshoot and fix a slow internet connection.

  • Check your Internet Speed and Plan

Well, your internet is slow because you are only paying for slow internet. So, to fix this issue, what you have to do, log onto our website and find out what plan you have and what causes a slow internet connection. After that, head on over to and run a ‘speed test’. If the numbers match up to what you are paying for, then your network is working absolutely fine and you are paying for a slow internet. In case, the numbers don’t match, then consider reading few ways to fix such an irritating problem.

Note: Also, remember that for Linksys Extender Setup and Linksys Extender Login you are supposed to have a good and live internet connection coming out of the main router.

  • Troubleshoot your Hardware

Before you go and curse your internet service provider, give your modem and router a quick reset, update and see if that helps or not. Also, check other computers in your house to see if their internet is slow or not. If the problem happens only on one computer, then the problem is your that particular computer, not modem or the router. In order to get rid of such annoying and maddening issues, run through these troubleshooting steps to see if it is a hardware problem or something else. Once you fix your router or modem you will be browsing speedily. Call our tech support executive for complete guide to knowing your network and for more router/ modem tips.

Note: Router is the main element for your ‘Linksys Setup Extender’. So, to fix your network connectivity issues, update your hardware device (router and modem) timely.

  • Fix your Existing WiFi Signals

If you are using a safe, secure, and reliable WiFi, then you might discover that your existing router and internet are okay, but your wireless signal is weak, causing a slow network connection. Well, in that case, you may need to reposition, tweak, and boost your router to a place where there are no interference creating WiFi devices. Moreover, don’t forget that we are still there for you. If you are still facing the same issue, then we would insist that consider calling us as soon as possible.

Note: To access linksys, you should have a good internet connection and an updated firmware of router so that you can connect it with your Linksys range extender.

  • Optimize your Web for a Slow Internet Connection

Well, troubleshooting a slow internet can take a short while, and in the meantime, you still need to browse or access Maybe you are at a coffee shop or on a plane, and there is nothing you can do about your sluggish speeds (internet). So, it is time to optimize your web for a slower or week connection. In that case, use mobile or HTML versions of your favorite sites, disable images, and use features like ‘Opera Turbo’ (most advance in today’s modern era). Similarly, we also recommend setting up a secondary browser on your laptop/ computer for such a situation. It can actually make a difference when you need to work on a slow internet or network connection. It may also interest you to know that ‘Google’ has its own ‘Data Saver Extension’ that employs the company servers to squeeze browsing data before it reaches you.

  • Try a New DNS Server

When you type extender.linksys (web address) into your browser your computers uses DNS to look up and translate that into a computer-friendly IP address (default). Though, the servers that your computer uses to look up that information can have issues, or entirely break down. Check out with our tech support team to find the fastest and most secure DNS servers. In case, your default DNS servers aren’t having issues, then you probably won’t find too much of an improvement with an alternative server. Also, remember that it might speed up your browsing by a few milliseconds.

Netgear Extender Setup

Several Reasons for Lost or Dropped Wifi Internet Connections

The big barrier in the process of Netgear Extender Setup would be a drop or lost in WiFi Internet connection. Always remember, to troubleshoot against such issues, you have to place your router openly in neat, cool, and dry place. You might be thinking why router? Well, a router is the least essential element of your networking system. Without the presence of it, you cannot make any of your setup easy. It’s very important for you to receive a live Internet connection coming out of the main device. What else please have a look below?

  • Unite both the extender and the router to each other with the help of an Ethernet cable.
  • Bring computer or the laptop in range of your wireless device.
  • Open a web browser and type into field of the address bar. Make sure that you have the right Netgear Extender Setup Password (default), to fill in the required asked fields.
  • If not, doesn’t panic just ask regarding the same or any to the Netgear experts on a toll-free number 1-877-425-5462?
  • Keep your devices away from interference creating devices, before or after the process of installation and configuration?

Netgear Extender Setup Wizard

The following rose-petal steps will provide you step-by-step guidance to change the WiFi password (SSID) using smart wizard.

  • Take your computer closer to the router. After that, launch a web browser and type IP address into field of the address bar.
  • Provide the default login credentials to the displayed page. You can easily find them into the manual stapes provided by the maker of the device.
  • Under the Setup option, click on the icon Wireless Settings.
  • Replace the default SSID with an original one. Built and create something strong and secure (network name of about 8 characters and password of about 16 characters).
  • Click on apply to save the settings.

Note: Change the Default setting under Netgear expert supervision only.

Moreover, we all found that during the process of Netgear Extender Setup or any entertainment, the WiFi signals starts dropping for no understandable and observable reason. Well, before determining what to do about that Internet connection that keeps on falling, you are supposed to understand the cause behind such issue.

  • Not enough Network Range and Power

If you please, we would insist our dear and valuable users, to get rid of this problem permanently, do not move your computer or a laptop away from the router or the existing modem. Moreover, do not hide your router in a closet or cupboard. Never let its wires mess with dust and other wires. Do not bend the antennas of your router. Keep them straight.

  • Interference of WiFi Radio

Do you know the fact that the radio signals from assorted clients electronic products or gadgets around your house and devices, the router can mess up with their WiFi Network Signals? No, but it is the actual and a crystal clear fact. So in that case, you are just supposed to shut down all those devices that are the big disaster like Bluetooth speakers, cordless phones, microwave ovens, mixer grinder, electronic toys, etc. You never know that some of them carry the same frequency as of router.

Note: Beware of the devices that are used in your neighborhood.

  • Be sure that your Network isn’t Overloaded

Your devices are set up perfectly, you are receiving a good amount of signals everywhere in the house, but what would be the reason behind buffering in the videos or games? Well, the answer would be simple. Maybe your device is overloaded with malicious files and this will be the reason that in future your device will definitely throw heat instead of live signals.

To get rid of such issue, give your devices a little time till they are completely cool. Give your device a break. Clear all the browsing history, malicious files, malware, cache, and cookies from it, shut it down for a short while, give them a break and then restart it again. Moreover, you can also switch to the latest and updated version of the new modem.

Note: To know the exact status of your range extender, simply type the IP address of the device or mywifiext, into field of the address bar of a web browser.

Also, for more assistance and help, lay all the brain-teaser and annoying queries/issues you faced on the team of perfect technicians in the world. Dial 1-877-425-5462 toll-free.